If you have LYF Wind 4S Android device and want to install Stock Firmware on it? Then you are the right place. Lyf Wind 4S Android smartphone was launched in October 2016. The phone comes with a 5.00-inch HD display with a resolution of 720×1820 pixels. The Lyf Wind 4S is powered by 1.3GHz quad-core Qualcomm Snapdragon 210 MSM8909 processor with 2GB of RAM & 16GB of internal storage that can be expanded up to 128GB via a microSD card. As far as the cameras are concerned, the Lyf Wind 4S packs an 8-megapixel primary camera on the rear and a 2-megapixel front camera.
Here’s how to install a stock new version of Android (or ROM) on your LYF Wind 4S
for an even better Android experience. Android is great, but sometimes, the version you get with your LYF Wind 4S
whether its Android Nougat or something leaves a bit to be desired. your phone will run well at that time. But after a few years, you can slow down your phone and cannot work well. It is necessary for the Android phone and tablet to update the firmware in this situation firmware. Changing/installing ROM on your phone is easy to install a new operating system on your desktop or laptop system. We give you all needed files to Flash stock ROM on LYF Wind 4S
and we discuss errors of flashing ROM and we offer you solutions for errors. you can easily update and install the Stock firmware on your device to keep your phone faster and updated with new features. there are a few requirements and basics you’ll need to learn first.
The stock firmware operating system is the result of many research and testing done by the vendor, device manufacturer and/or mobile service carrier. Therefore, there are several advantages in it:
- Flash Stock Rom to Unbrick your LYF Wind 4S.
- Upgrade and Downgrade your LYF Wind 4S Rom.
- Unroot or Fix Bugs on your android smartphone.
- To fix the lag or stutter on LYF Wind 4S.
- Fix the boot loop error.
- By flashing Stock ROM, you can solve several software problems.
- Revert back to stock to gain your warranty.
- It carries the official support by the firmware vendor, device manufacturer and the mobile service carrier.
- Updates are pushed automatically to the device by the device manufacturer.
- This new Stock Rom has to be installed on the LYF Wind 4S model only; if tried on another smartphone, your device might get bricked [To check your device model: Go to Settings >> About phone >> model number].
- Enable the USB Debugging & OEM unlock. to allow USB debugging Go to Setting -> About Phone -> Now Tap on Build Number 7 times until you see a message on the screen like ” You Are Now A Developer.”
- You need a Laptop or PC & USB cable.
- Your Android Smartphone should have at least 60-70 % of battery to perform the flashing process.
- Download all the files from the below download link and Install Android USB Driver on your computer.
Guide to Install Stock Rom
If your LYF Wind 4S brick, then you can Unbrick or Fix Bootloop using Stock Firmware. Here’s the guide about How to Install Stock firmware on LYF Wind 4S.
Thank you for reading this post, That was the complete step by step guide on How to Install Stock ROM/Firmware on LYF Wind 4S. Stay connected to Kbloghub.com to continue enjoying the amazing posts. Share your thoughts about this post in the comments section below.