If you have bought this device and want to install Stock Firmware on YU Yuphoria? Then you are the right place. Here we will guide you to install the official Stock ROM on YU Yuphoria. Yu Yuphoria Andriod smartphone was launched in May 2015. This phone comes with a 5-inch HD display with 720P resolution. It is a dual sim (GSM and GSM) smartphone that accepts micro-SIM and micro-SIM connectivity options Wi-Fi, GPS, Bluetooth, FM, 3G and 4G, YU Yuphoria is powered by 1.2 GHz quad-core Qualcomm Snapdragon 410 MSM 8916 processors with 2 GB RAM & 16 GB of internal storage, which can be extended up to 32 GB via micro SD card. As far as the cameras are concerned, YU-Yuphoria has an 8-megapixel primary camera and a 5-megapixel front camera.

When you buy a new YU Yuphoria Android smartphone, your phone will run well at that time. But after a few years, you can slow down your phone and cannot work well. It is necessary for the Android phone and tablet to update the firmware in this situation firmware. Changing/installing ROM on your phone is easy to install a new operating system on your desktop or laptop system. we give you all needed files to Flash stock ROM on YU Yuphoria and we discuss errors of flashing ROM and we offer you solutions for errors. you can easily update and install the Stock firmware on your device to keep your phone faster and updated with new features. So, try to update the firmware to keep your device well.

Advantage Of Stock ROM

      The stock firmware operating system is the result of many research and testing done by the vendor, device manufacturer and/or mobile service carrier. Therefore, there are several advantages in it:
      • Flash Stock To Unbrick your YU Yuphoria.
      • Upgrade and Downgrade your YU Yuphoria Rom.
      • Unroot or Fix Bugs on your android smartphone.
      • To fix the lag or stutter on YU Yuphoria.
      • Fix the boot loop error.
      • By flashing Stock ROM, you can solve several software problems.
      • Revert back to stock to gain your warranty.
      • It carries the official support by the firmware vendor, device manufacturer and the mobile service carrier.
      • Updates are pushed automatically to the device by the device manufacturer.

      PRE-REQUISITES

        • This new Stock Rom has to be installed on the YU Yuphoria model only; if tried on another smartphone, your device might get bricked [To check your device model: Go to Settings >> About phone >> model number].
        • Enable the USB Debugging & OEM unlock. to allow USB debugging Go to Setting -> About Phone -> Now Tap on Build Number 7 times until you see a message on the screen like ” You Are Now A Developer.
        • You need a Laptop or PC & USB cable. 
        • Make sure your device has more than 60-70 % battery.
        • Download all the files from the below download link.

        DOWNLOAD

           Guide to Install Stock Rom

            If your YU Yuphoria brick, then you can Unbrick or Fix Bootloop YU Yuphoria using Stock Firmware. Here’s the guide about How to Install Stock firmware on YU Yuphoria.

            Thank you for reading this post, That was the complete step by step guide on How to Install Firmware on YU Yuphoria.  stay connected to Kbloghub.com to continue enjoying the amazing posts. Share your thoughts about this post in the comments section below.

            LEAVE A REPLY

            Please enter your comment!
            Please enter your name here