If you have bought this device and want to install Stock Firmware on YU Yureka Note? Then you are the right place. Here we will guide you to install the official Stock ROM on YU Yureka Note. Yu Yureka Note Android smartphone comes with a 6.00-inch touchscreen display with a resolution of 1080 pixels by 1920 pixels. The Yu Yureka Note is powered by 1.5GHz octa-core MTK6753T processor and it comes with 3GB of RAM. The phone packs 16GB of internal storage that can be expanded. As far as the cameras are concerned, the Yu Yureka Note packs a 13-megapixel primary camera on the rear and a 5-megapixel front-facing camera. When you buy a new YU Yureka Note Android smartphone, your phone will run well at that time. But after a few years, you can slow down your phone and cannot work well. It is necessary for the Android phone and tablet to update the firmware in this situation firmware. Changing/installing ROM on your phone is easy to install a new operating system on your desktop or laptop system. we give you all needed files to Flash stock ROM on YU Yureka Note and we discuss errors of flashing ROM and we offer you solutions for errors. you can easily update and install the Stock firmware on your device to keep your phone faster and updated with new features. So, try to update the firmware to keep your device well.

Advantage Of Stock ROM

      The stock firmware operating system is the result of many research and testing done by the vendor, device manufacturer and/or mobile service carrier. Therefore, there are several advantages in it:
      • Flash Stock To Unbrick your YU Yureka Note.
      • Upgrade and Downgrade your YU Yureka Note Rom.
      • Unroot or Fix Bugs on your android smartphone.
      • To fix the lag or stutter on YU Yureka Note.
      • Fix the boot loop error.
      • By flashing Stock ROM, you can solve several software problems.
      • Revert back to stock to gain your warranty.
      • It carries the official support by the firmware vendor, device manufacturer and the mobile service carrier.
      • Updates are pushed automatically to the device by the device manufacturer.

      PRE-REQUISITES

        • This new Stock Rom has to be installed on the YU Yureka Note model only; if tried on another smartphone, your device might get bricked [To check your device model: Go to Settings >> About phone >> model number].
        • Enable the USB Debugging & OEM unlock. to allow USB debugging Go to Setting -> About Phone -> Now Tap on Build Number 7 times until you see a message on the screen like ” You Are Now A Developer.
        • You need a Laptop or PC & USB cable. 
        • Make sure your device has more than 60-70 % battery.
        • Download all the files from the below download link.

        DOWNLOAD

           Guide to Install Stock Rom

            If your YU Yureka Note brick, then you can Unbrick or Fix Bootloop YU Yureka Note using Stock Firmware. Here’s the guide about How to Install Stock firmware on YU Yureka Note.

            Thank you for reading this post, That was the complete step by step guide on How to Install Firmware on YU Yureka Note.  stay connected to Kbloghub.com to continue enjoying the amazing posts. Share your thoughts about this post in the comments section below.

            LEAVE A REPLY

            Please enter your comment!
            Please enter your name here