Do you want to Install Official Stock Firmware/ROM on your Cubot Cheetah smartphone? If yes then you are at the right place.  Android is great, but sometimes, the version you get with your Cubot Cheetah whether its latest Android version. your phone will run well at that time. But after a few months, Your phone slow down and cannot work well. Cubot Cheetah Android smartphone comes with a 5.50-inch HD display with a resolution of 1080×1920 pixels. The Cubot Cheetah is powered by 1.3 GHz Cortex A53 octa-core processor with 3GB of RAM & 32GB of internal storage. As far as the cameras are concerned, the Cubot Cheetah packs a 13-megapixel primary camera on the rear and an 8-megapixel front-facing camera. In this post, we will provide you a detailed guide, which will not only include all the basic flashing details, but also a step-by-step instruction to easily flash Stock Rom on your Cubot Cheetah smartphone in minutes. It is necessary for the Android smartphone to update the firmware in its stock firmware. Changing/installing ROM on your phone is easy to install a new operating system on your desktop or laptop system. We give you all needed files to Flash stock ROM on Cubot Cheetah and we discuss errors of flashing ROM and we offer you solutions for errors. you can easily update and install the Stock firmware on your device to keep your phone faster and updated with new features. there are a few requirements and basics you’ll need to learn first.

Advantage Of Stock ROM

      The stock firmware operating system is the result of many research and testing done by the device manufacturer and/or mobile service carrier. Therefore, there are several advantages in it:
      • Flash Stock Rom to Unbrick your Cubot Cheetah.
      • By flashing Stock ROM, you can solve several software problems.
      • Revert back to stock to gain your warranty back.
      • Latest updates are pushed automatically to the device by the device manufacturer.
      • Upgrade and Downgrade your Cubot Cheetah Rom.
      • Unroot or Fix Bugs on your android smartphone.
      • To fix the lag or stutter on Cubot Cheetah.
      • Fix the boot loop error.

      Pre-requirements:-

      • This new Stock Rom has to be installed on the Cubot Cheetah model only; if tried on another smartphone, your device might get bricked [To check your device model: Go to Settings >> About phone >> model number].
      • Enable the USB Debugging & OEM unlock of Cubot Cheetah. To allow USB debugging Navigate to Setting >> About Phone >> Now Tap on Build Number 7 times until you see a message on the screen like ” You Are Now A Developer.
      • You need a Laptop or PC & USB cable. 
      • Your Cubot Cheetah Smartphone should have at least 60-70 % of battery to perform the flashing process.
      • Download all the files from the below download link and Install Android USB Driver for your device.

      Download Links:-

      How To Install Stock ROM on Cubot Cheetah

      If you bricked your Cubot Cheetah smartphone, then you can Unbrick or Fix Bootloop using Stock Firmware. Here’s the guide about How to Install Stock firmware on Cubot Cheetah.

      Thank you for reading this post on How to Install Stock ROM on Cubot Cheetah and Keep connected to Kbloghub to continue enjoying these type of posts. Share your view about this post in the comment section below. If you find this post helpful, Please share this post on social media. It will only take a few moments and also it is quite easy and helpful for others.

      LEAVE A REPLY

      Please enter your comment!
      Please enter your name here