Do you want to Install Official Stock Firmware/ROM on your Micromax Evok Power smartphone? If yes then you are at the right place.  Android is great, but sometimes, the version you get with your Micromax Evok Power whether its latest Android version. your phone will run well at that time. But after a few months, Your phone slow down and cannot work well. Micromax Evok Power Android smartphone was launched in April 2017. The phone comes with a 5.00-inch HD display with a resolution of 720×1280 pixels. The Micromax Evok Power is powered by 1.3GHz quad-core MediaTek MT6737 processor with 2GB of RAM & 16GB of internal storage that can be expanded. As far as the cameras are concerned, the Micromax Evok Power packs an 8-megapixel primary camera on the rear and a 5-megapixel front-camera. In this post, we will provide you a detailed guide, which will not only include all the basic flashing details, but also a step-by-step instruction to easily flash Stock Rom on your Micromax Evok Power smartphone in minutes. It is necessary for the Android smartphone to update the firmware in its stock firmware. Changing/installing ROM on your phone is easy to install a new operating system on your desktop or laptop system. We give you all needed files to Flash stock ROM on Micromax Evok Power and we discuss errors of flashing ROM and we offer you solutions for errors. you can easily update and install the Stock firmware on your device to keep your phone faster and updated with new features. there are a few requirements and basics you’ll need to learn first.

Advantage Of Stock ROM

      The stock firmware operating system is the result of many research and testing done by the device manufacturer and/or mobile service carrier. Therefore, there are several advantages in it:
      • Flash Stock Rom to Unbrick your Micromax Evok Power.
      • By flashing Stock ROM, you can solve several software problems.
      • Revert back to stock to gain your warranty back.
      • Latest updates are pushed automatically to the device by the device manufacturer.
      • Upgrade and Downgrade your Micromax Evok Power Rom.
      • Unroot or Fix Bugs on your android smartphone.
      • To fix the lag or stutter on Micromax Evok Power.
      • Fix the boot loop error.

      Pre-requirements:-

      • This new Stock Rom has to be installed on the Micromax Evok Power model only; if tried on another smartphone, your device might get bricked [To check your device model: Go to Settings >> About phone >> model number].
      • Enable the USB Debugging & OEM unlock of Micromax Evok Power. To allow USB debugging Navigate to Setting >> About Phone >> Now Tap on Build Number 7 times until you see a message on the screen like ” You Are Now A Developer.
      • You need a Laptop or PC & USB cable. 
      • Your Micromax Evok Power Smartphone should have at least 60-70 % of battery to perform the flashing process.
      • Download all the files from the below download link and Install Android USB Driver for your device.

      Download Links:-

      How To Install Stock ROM on Micromax Evok Power

      If you bricked your Micromax Evok Power smartphone, then you can Unbrick or Fix Bootloop using Stock Firmware. Here’s the guide about How to Install Stock firmware on Micromax Evok Power.

      Thank you for reading this post on How to Install Stock ROM on Micromax Evok Power and Keep connected to Kbloghub to continue enjoying these type of posts. Share your view about this post in the comment section below. If you find this post helpful, Please share this post on social media. It will only take a few moments and also it is quite easy and helpful for others.

      LEAVE A REPLY

      Please enter your comment!
      Please enter your name here