Stock Rom is an official firmware that is preinstalled on every new device. Most of the Android users don’t stick to single Rom/firmware always. Most people often change firmware, try new custom ROMs or flash kernels to improve overall device performance. So if you are using Custom ROM on Micromax Canvas Juice 3 and searching for a perfect guide to flash stock firmware on Micromax Canvas Juice 3 then you are at the right place. We will guide you on how to download and install Stock firmware 0on your smartphone. Micromax Canvas Juice 3 Android smartphone was launched in September 2015. The phone comes with a 5.00-inch HD display with a resolution of 720×1280 pixels. The Micromax Canvas Juice 3 is powered by 1.3GHz quad-core MediaTek MT6580 processor with 2GB of RAM & 8GB of internal storage that can be expanded up to 32GB via a microSD card. As far as the cameras are concerned, the Micromax Canvas Juice 3 packs an 8-megapixel primary camera on the rear and a 2-megapixel front camera.
Custom ROM is modified version of Operating System such as LineageOS, Resurrection Remix, etc. There are many advantages of using custom ROM on your Micromax Canvas Juice 3 Device but along with it, there might be some disadvantages too. There is some issue that is not going away by clearing cache or even by a factory reset. Sometimes, the partition table of the Micromax Canvas Juice 3 device itself gets corrupted resulting in a semi-hard or hard-brick in the worst scenario. Most common reason for flashing a stock firmware is to unroot your device to get back to the factory settings in order to receive OTA updates.

In this post, we will provide you a detailed guide, which will not only include all the basic flashing details, but also a step-by-step instruction to easily flash Stock Rom on your Micromax Canvas Juice 3 in few minutes. You do not need any specialization to do this procedure. We give you all the necessary files in Flash Stock Rom on Micromax Canvas Juice 3. Before we get started with the step-by-step tutorial, make sure that you have the following tools ready and in place to begin.

Advantage Of Stock ROM

      The stock firmware operating system is the result of many research and testing done by the device manufacturer and/or mobile service carrier. The benefits of updating your Micromax Canvas Juice 3 device include.
      • You can unbrick your Micromax Canvas Juice 3 Device if it’s boot looping and is stuck at the logo during a reboot.
      • A set of new features with the latest updates that you might be missing out on.
      • Flashing Stock ROM can solve several software issues. 
      • Essential security patches to keep your Micromax Canvas Juice 3 device safe and secure.
      • Improved hardware and software performance along with optimizations.
      • You can remove any custom recovery like TWRP, Philz, and CWM, if installed, on your Micromax Canvas Juice 3.
      • Latest updates are pushed automatically to Micromax Canvas Juice 3 by the device manufacturer.

      Pre-requirements:-

      • Download the correct stock firmware. You can check your model number by navigating to [To check your device model: Go to Settings >> About phone >> model number].
      • This Stock Firmware has to be installed on the Micromax Canvas Juice 3 only;  Do not try this on any other device or variant. if tried on another smartphone, your device might get bricked.
      • Enable the USB Debugging & OEM unlock of Micromax Canvas Juice 3. To allow USB debugging Navigate to Setting >> About Phone >> Now Tap on Build Number 7 times until you see a message on the screen like ” You Are Now A Developer.
      • You need a Laptop or PC & USB cable. 
      • Your Micromax Canvas Juice 3 Device battery should be greater than 50% to perform the flashing process.
      • Download all the required files from the below download link and also Install appropriate USB Driver for your device.

      Download Links:-

      Stock Rom for Micromax Canvas Juice 3 Download
      SP Flash Tool  Download 
      Install Vcom Driver Download

      How To Install Stock ROM on Micromax Canvas Juice 3

      This process will not only return your Micromax Canvas Juice 3 to its original firmware, but it is also the very useful procedure if somehow you messed-up your device. you can Unbrick or Fix Bootloop using Stock Firmware.

      Thank you for reading this post to install stock ROM on Micromax Canvas Juice 3 and stay connected to Kbloghub to continue enjoying these types of posts. If you have any questions regarding this procedure, you can comment right away. Also, you can give a call for a dead link to replace it with a new one. If you find this post helpful, please share this post on social media. It will take only a few moments and it will be quite easy and helpful for others.

      LEAVE A REPLY

      Please enter your comment!
      Please enter your name here